Ross Synergy 100 MD, Руководство оператора

Страница: 290 / 402

17–14 • Squeeze & Tease MD Sequences and Wipes Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Modifying the Keyframes of a Sequence
The Modify Keyframes feature enables you to edit a Keyframe and apply that change to the entire
sequence, current or previous keyframes, or current and subsequent Keyframes.
The range of keyframes to modify is configured through the Modify Keyframes Menu , which is
accessed through the Sequence Menu .
Modifying Multiple Keyframes in a Sequence
The following procedure explains how to modify keyframes in a simple, four Keyframe, sequence.
We will reposition Keyframe 2 and apply those changes to Keyframes 3 and 4.
When modifying a sequence where multiple channels are assigned in a Keyframe, parameters for each
channel are calculated separately. The total number of parameters modified is displayed in the
Modify
Keyframes Menu until Perform Modify is pressed. Once modified, the value resets to 0. Refer to
the section “ Working with Channels ” on page 12–20 for information on using multiple channels in a
keyer.
Use the following procedure to modify the range of Keyframes in a sequence using the Modify
Keyframe function:
1. Create or load the sequence similar to the four Keyframe sequence you created in the
section “ Creating a Four Keyframe Sequence ” on page 17–6.
2. Press 2. Next Keyframe on the Sequence Menu to advance to the second Keyframe in
the sequence.
3. Navigate to the Position/Crop Menu as follows:
• Press BACK to display the Squeeze & Tease MD Menu .
• Press 0. Position/Crop to display the Position/Crop Menu .
Position/Crop Menu
Note
For information on modifying a single keyframe in a sequence, refer to
the section “
Overwriting a Keyframe ” on page 17–17.
Note
Lighting parameters cannot be modified across multiple keyframes at
this time.
Note
You must be Flying a Key to display the Position/Crop Menu for that
Key.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Position/Crop 1 2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Off
Off