Ross Synergy 100 MD, Руководство оператора

Страница: 261 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Borders • 15–5
3. Use the
SAT
knob, or move the Positioner up and down , to adjust the softness of the
border. Softness is applied to the inner and outer edges of the channel, as well as the
border.
• Minimum Softness — at
0.0%
the edges of the border are square.
• Maximum Softness — at
100.0%
the edges of the border come together to form a
point in the center.
This completes the procedure for adjusting the softness of the border.
Border Symmetry
Symmetry is used to alter the center position of the channel border. As you adjust the symmetry, the
relative center of the border expands outwards from the true center of the border. The default
symmetry of
50% sets the relative center to the true center of the border.
Use the following procedure to adjust the symmetry of the border:
1. Navigate to the Border Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 1. Border to display the Border Menu .
2. Press 0. Size to display the Size Menu .
Note If no border has been applied to the channel, the Softness effect will be
applied to the edges of the channel.
Border Softness at
72.0%
Border Softness at
0.0%
Operating
Tip
You can use the BORDER hotkey to display the Border Menu
directly.