Ross Synergy 100 MD, Руководство оператора

Страница: 226 / 402

12–16 • Squeeze & Tease MD Basic Operation Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
3D Guidelines
The Fly Key function allows you to apply 3D DVE effects to all of the Key types, with the ability to
control the position and rotation of the Key along all three axes in 3D space.
Fly Key Rules
There are a number of important rules that apply to the operation of the
FLY KEY
. These rules apply
to both the MLE Keyers and the Downstream Keyers:
• You can Fly any type of Key.
• You can Fly any combination of Keys.
• You can Fly a Color Background .
• You cannot Fly a Downstream Key (DSK).
• You cannot Fly a MultiDSK Key (MultiDSK option).
• Different Key Types require a different number of Squeeze & Tease channel resources to
operate. The different Key Types and the required number of channels and resources is
listed as follows:
~
Self Keys
require
2
Squeeze & Tease channel resources and are shown as
1
Channel.
~ Auto Select Keys require
2
Squeeze & Tease channel resources and are shown as
1
Channel.
~
Chroma Keys
require
2
Squeeze & Tease channel resources and are shown as
1
Channel.
~
Preset Pattern Keys
require
1
Squeeze & Tease channel resources and are
shown as
1
Channel.
• To use a preset pattern Key without the Fly Key mode, press
FLY KEY
to disable the
mode.
• If
PST PATT
is already on and the Fly Key mode is off, pressing
PST PATT
again will
not automatically enable Fly Key . This feature only works when you change to the
Preset Pattern mode.
• If
FLY KEY
is enabled, changing the Key type to Self Key , Auto Select or Chroma
Key automatically turns the Fly Key mode off and switches to the selected Keying
mode.
• Advanced Picture Frame Borders can only be applied to Preset Pattern Keys .
Note
Ensure that the Squeeze & Tease MD option is installed. Refer to
Chapter 6 “ Software Upgrades and Options ” in your Synergy 100
MD Engineering Manual for instructions on how to verify the status
of your installed hardware and software options.