Ross Synergy 100 MD, Руководство оператора

Страница: 180 / 402

10–10 • Peripheral Control and More Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Copy and Swap Functions
The Copy and Swap functions allow you to copy or swap various settings from Key to Key. For all
copy functions, the
destination-source rule applies. You select the destination for the copy and press
and hold the appropriate button. With the destination selected, press the source button to copy the
information.
The following copy and swap functions are available:
• Copy Key — This function allows you to copy the contents of one Keyer to the other
Keyer within the Effects Keyers Group .
• Key Swap — This function allows you to swap the entire contents of one Keyer with the
contents of the other Keyer within the Effects Keyer Group .
Copy Key
The Copy Key function allows you to copy the entire contents of Key 1 to Key 2 in the Effects
Keyers Group .
Use the following procedure to copy a the contents of Key 1 into Key 2:
1. Set up Key 1. This will assign the Effects Keyers Group to the Key you want to copy
from.
2. Press and hold the Key Type button of the Key you want to copy.
Effects Keyer – Copy Key
3. Press KEY2 in the Effects Keyers Group to copy the contents of Key 1 to Key 2.
4. Release both buttons.
This completes the procedure for copying Key 1 into Key 2.
Note
You cannot copy or swap Key settings with the Downstream Keyer.
Note
You can only copy Key 1 one into Key 2.
Note
When you copy a Keyer to another Keyer, the entire contents (except
matte fill color) of the source Keyer is copied to the destination,
including the selected Key crosspoint.
ON AIR
HUE/
TRANSP
GAIN
CLIP
FLY
KEY
SELF
KEY
AUTO
SELECT
MASK
KEY
INVERT
PST
PATT
CHROMA
KEY
MATTE
FILL
KEY2
E F F E C T S K E Y E R S