Ross Synergy 100 MD, Руководство оператора

Страница: 105 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Pattern and Effects Control • 6–11
• Rotate the
LUM
knob to change the luminance of the selected matte generator.
Luminance can be adjusted from
0
(minimum brightness, or black) to
100
percent
(maximum brightness, or white).
2. Matte Destination Section
The
SEL
button in the Matte Destination Section allows you to select one of five
standard matte generators. Each generator is capable of generating one color. The
generators are selected automatically (as outlined below) or they can be selected
manually.
• Press
SEL
in the Mattes Group and scroll through the options until
BKGD
appears in the display. This matte generator is automatically selected when the
COLOR BKGD
buttons on the bus rows are pressed.
When
BKGD
is selected, you can adjust the selected
COLOR BKGD
color using
the three Matte Color knobs.
• Press
SEL
in the Mattes Group and scroll through the options until
WIPE
appears
in the display. This matte generator is automatically selected when the
WIPE
button
in the Transition Control Group is pressed.
When
WIPE
is selected, you can adjust the selected wipe border color using the
three Matte Color knobs.
• Press
SEL
in the Mattes Group and scroll through the options until
DSK
appears
in the display. This matte generator is used by the Downstream Keyer’s matte fill
generator. It is automatically selected when any of the buttons in the Downstream
Keyer Group are pressed.
When
DSK
is selected, you can adjust the downstream key’s matte fill color using
the three Matte Color knobs.
• Press
SEL
in the Mattes Group and scroll through the options until
KEY1
appears
in the display. This matte generator is used by the Effects Keyers Key 1’s matte fill.
It is automatically selected when the following buttons are pressed:
~
Any of the buttons relating to Key 1 in the Effects Keyer Group except
PST
PATT
.
When
KEY1
is selected, you can adjust the Effects Key 1’s matte fill color using
the three Matte Color knobs.
• Press SEL in the Mattes Group and scroll through the options until KEY2 appears
in the display. This matte generator is used by the Effects Keyers Key 2’s matte fill.
It is automatically selected when the following buttons are pressed:
~
Any of the buttons relating to Key 2 in the Effects Keyer Group except
PST
PATT
.
When
KEY2
is selected, you can adjust the Effects Key 2’s matte fill color using
the three Matte Color knobs.
Note
The default
COLOR BKGD
color is blue.
Note
If PST PATT is selected in the Effects Keyers Group , you can not
select MATTE FILL .
LUM
SEL