Ross Synergy 1, Руководство по обслуживанию

Страница: 162 / 240

9–20 • Calibration and Diagnostics Synergy 1 and Synergy 100 Maintenance Guide (v16-S1)
5. Toggle the
Format
button between
Hex
and
ASCII
to set how the information is
displayed.
•
Hex
— Use this option to display the raw data as Hexadecimal numbers.
•
ASCII
— Use this option to display the data as printed characters.
6. Toggle the
View
button between
Tx
and
Rx
to display traffic flow.
•
Tx
— Use this option to display the traffic being transmitted from the panel.
•
Rx
— Use this option to display the traffic being received by the panel.
7. Toggle the
Freeze
button between
Yes
and
No
.
•
Yes
— Use this option to freeze the current data on the display and not record any
new traffic data.
•
No
— Use this option to continously cycle traffic data to allow for the newest data
to be displayed.
8. Press
Clear
to clear all recorded data for the selected traffic flow.
This concludes the procedure to monitor frame TX/RX functions.
Frame DIP/Jump Test
The DIP/Jump Test allows you to test the DIP and jumper switches in the Synergy 1 frame with the
aid of a graphical representation on the display.
Use the following procedure to test the frame DIP and jumper switches:
1. Navigate to the Frame Diagnostics Menu as follows:
• Press HOME (to display the Main Menu 1-2 )
• MORE (to display the Main Menu 2-2 )
• Setup (to display the Setup Menu )
• Frame Diagnostics (to display Frame Diagnostics Menu )
2. Press DIP/Jump Test to display the Frame DIP/Jump Test Menu .
Frame DIP/Jump Test Menu
The graphical representation runs in real time, meaning any changes to the physical state
of the frame DIP or jumper switches are instantly displayed. However, as the majority of
these switches are for factory use only, we do not advise accessing these switches
without first contacting Technical Support for assistance.
This completes the procedure to test the Synergy 1 frame DIP and jumper switches.