Ross Synergy 1, Руководство по обслуживанию

Страница: 115 / 240

Synergy 1 and Synergy 100 Maintenance Guide (v16-S1) Working with Installed Options • 6–7
Installing Software Options – Synergy 1
Use this procedure to activate your software options (after entering a new serial number) or to install a
new software option that you have just purchased:
1. Navigate to the Software Options Menu as follows:
• Press HOME (to display the Main Menu 1-2 ).
• MORE (to display the Main Menu 2-2 ).
• Setup (to display the Setup Menu ).
• Installed Options (to display the Installed Options Menu 1-2 ).
• Software Options (to display the Software Options Menu ).
2. Press Add Option to display the Add Option Menu .
Add Option Menu
3. Call Ross Video Technical Support at the number listed on the menu.
4. When you speak to our Technical Support representative, tell them your name, your
facility name, the switcher’s serial number and the Encrypt Code as listed on the menu.
5. Tell the Technical Support representative the name of the option(s) that you wish to
install. Technical Support keeps an up-to-date record of each switcher’s configuration
and option status.
6. You will be given a numeric code for each option to enter on the Synergy 1 switcher:
• Enter the code using the keypad in the Global Memory System Group .
• To complete the process, press ENTER on the keypad or press Finished on the
Option Number Menu .
• Once entered, the menu indicates “ Installed ,” and the system displays the Software
Options Menu to confirm.
7. Repeat steps 5 and 6 for each option.
This completes the procedure to activate your software options.
Note
Ensure that your serial number has been entered correctly. If not, refer
to the section “
Installing Serial Numbers – Synergy 1 ” on page 6–6
for instructions.
Operating
Tip
Before entering new option codes, save your current option settings to
a storage device. Refer to the section “
Storing and Recalling Option
Codes – Synergy 1 ” on page 6–8 for details.