Ross SRG-4400, Руководство пользователя

Страница: 38 / 193

3–8 • Functional Check Procedures SRG-4400 User Manual (Iss. 06)
8.
Repeat steps 4 - 6 to confirm the configuration of the SDI1 Black output.
9.
Return to step 2, set for < Video Channel 02 = SDI+Black 2 >, and repeat steps to check
both of the SDI2 outputs.
10.
Return to the Top Level menu using the [ Back ] button.
SDI Embedded Audio Settings
Audio channels on the SDI outputs are arranged as 8 stereo pairs on each video output:
• SDI 1 Pattern 01 … 16
• SDI 1 Black 01 … 16
• SDI 2 Pattern 01 … 16
• SDI 2 Black 01 … 16.
From the Top Level menu:
1.
Select < -Audio >.
2.
Select < SDI 1 Pattern Left = Audio 01 >.
3.
Connect the SDI1 Pattern video output to the Serial Digital Video Analyzer or to a
Digital Audio De-Embedder using a 75ohm BNC cable.
4.
Set the Analyzer / De-Embedder to display the status of the audio data, and to receive a
signal through the connected input.
5.
Check that the Analyzer / De-Embedder does not report any data errors, etc.
6.
Check that the Digital Audio signal is as configured in the menu, and that selecting and
editing entries in the menu by using the rotary/push control, the configuration of the
Digital Audio signal changes accordingly.
7.
Repeat steps 3 - 6 for menu selection:
< SDI 1 Pattern Right = Audio 02 > on SDI1 Pattern video output.
8.
Repeat steps 3 - 6 for menu selections:
< SDI 1 Pattern Left / Right = Audio 03….16 > on SDI1 Pattern video output.
9.
Repeat steps 3 - 6 for menu selections:
< SDI 1 Black Left / Right = Audio 01….16 > on SDI1 Black output.
10.
Repeat steps 3 - 6 for menu selections:
< SDI 2 Pattern Left / Right = Audio 01….16 > on SDI2 Pattern video output.
11.
Repeat steps 3 - 6 for menu selections:
< SDI 2 Black Left / Right = Audio 01….16 > on SDI2 Black output.
12.
Return to the Top Level menu using the [ Back ] button.
AES / EBU Audio Outputs
Audio channels on the AES outputs are arranged as stereo pairs on each output:
• AES 1 01 …. 02
Note
— AES/EBU Audio Outputs are only available when the multifunction sub-module is
installed.