•
Reset Simply
— click this button to reset only the image
parameters.
•
Reset Completely
— click this button to reset all settings to
factory defaults, except the
SYSTEM
>
VISCA
setting, Web
Interface login credentials, and presets. If the IP address has been set
to a value other than the default, the Web Interface loses connection
with the camera. To re-establish a Web Interface connection, you can
either set the IP address using the remote control, or navigate to the
default IP address (192.168.1.188).
•
Reboot
— click this button to reboot the camera.
Account
The
Account Setting
page allows you to change the account name and
password used to access the camera.
Note:
There is only ONE account for a camera. If you change the account name
and password you cannot use the old account to access the camera.
To Set a New Account Name and Password
1.
Enter a new account name in the
Account
field.
2.
Enter a new password in the
Password
field.
3.
Enter the same password in the
Confirm Password
field.
38
• Web Interface — PIVOTCam-SE User Manual
