On-screen Menu System
The menu system is displayed on the video output of the camera and
allows you to set up and configure various aspects of the camera. You
can access the on-screen menu either within the PTZ Camera Control
interface in DashBoard (
Config
>
Open On-Screen Menu
), or by
pressing the
MENU
button on the remote control.
Within the on-screen menu, press the navigation buttons to highlight an
item, and press the
OK
button to select it.
Press the
MENU
button again to go up one layer in the menu tree or exit
the menu system. You are prompted to save your settings when you exit
the menu system.
System
Item
Settings
PROTOCOL
VISCA (fixed)
ADDRESS
(applies only for
control via serial port)
1 to 7
BAUD RATE
(applies only for
control via serial port)
2400, 4800, 9600, 115200
PTL LOCK
(protocol lock)
•
ON
— protocol setting (above) is locked
•
OFF
— protocol setting is unlocked
RS485
•
ON
— serial communication set to RS-485
(2-wire only)
•
OFF
— serial communication set to RS-232
VISCA
•
OVER COM
— remote control (VISCA
protocol) on serial port.
•
OVER IP
— remote control (VISCA
protocol) on ethernet port.
LANGUAGE
(menu language) — English, Chinese
Exposure
Item
Settings
EXPOSURE MODE
Auto, Manual, Shutter, Iris, Bright
PIVOTCam-SE User Manual — On-screen Menu System •
21
