Ross Opengear UDC-8625A Series, Руководство пользователя, Страница: 113 / 174

UDC-8625A Series User Manual (Iss. 11) Appendix A. DashBoard Menus • 9–9
Output Delay Values
Table 9.5 summarizes the range of values displayed in the Output Horizontal Delay and Output
Delay menus based on the output format.
GPI Configuration
The menu items available in the GPI/Tally tab enable you to configure each GPI.
a. 1080p formats are not supported on the 8310AR-033 rear modules.
b. The menus and parameters for Output 4 are not implemented when using the 8322AR-065 rear module.
c. This is output to reference, not the total processing delay.
d. The range of values displayed is dependent on the output format you are using. When the output format changes, these values are
automatically updated based on the absolute time. Refer to
Table 9.5 for the range of values based on the output format.
e. If the output format is changed, the values are updated. If you are switching from an interlaced format to a progressive format, the
values are multiplied by 2. If switching from a progressive format to an interlaced format, the value is divided by 2.
f. Slight deviation into Super White and Super Black may be possible due to color space conversion between SD and other formats.
Table 9.5 Range of Values for the Output Delay Settings
Output Format
Output Horizontal Delay
(Clocks)
Output Vertical Delay
(Lines)
480i 0 to 1715 0 to 524
576i 0 to 1727 0 to 624
720p 0 to 3299 0 to 749
1080i, 1080p
a
a. 1080p formats are not supported on the 8310AR-033 rear module.
0 to 4399 0 to 1124
Note
—The 8320AR-041 rear module does not include GPIO ports. You can
configure the settings on the GPI/Tally tab, but the changes do not take effect.
Table 9.6 GPI Configuration Menu Items
Option Title Item Parameter Description
GPI #
Function
None*
The GPIO port is not configured and the GPI
has no effect
GPI Cut Bkgd
A cut is performed between the Background
sources when this GPI input is triggered
GPI Auto Bkgd
An auto transition is performed between the
Background sources when this GPI input is
triggered
GPI Cut Key #
The key is cut on-air or off-air when this GPI
input is triggered
GPI Auto Key #
An auto transition is performed to bring the
key on-air or off-air when this GPI input is
triggered
GPI Fade to Black
A fade to black is performed when this GPI
input is triggered
GPI Recall ARC Profile #
The specified ARC Profile is recalled when
this GPI is triggered
GPI Send OP42 Cleardown
A request to clear the OP42 page is sent when
this GPI input is triggered