TSI-100 User Guide (v5.0)
Upgrading the Software • 23
Upgrading the Software
Your TSI-100 can be upgraded in the field via DashBoard.
To upgrade the software on a TSI-100
1. Contact Ross Technical Support for the latest software version file.
2. Launch the DashBoard client on your computer.
3. Display a tab for the card you wish to upgrade by double-clicking its status indicator in the
Basic Tree View
.
4. From the
Device
tab, click
Upload
to display the
Select File for upload
dialog.
5. Navigate to the
*.bin
upload file you wish to upload.
6. Click
Open
and follow the on-screen instructions.
7. Click
Finish
to start the upgrade.
8. Monitor the upgrade.
• A
Upload Status
dialog enables you to monitor the upgrade process.
• The card reboots automatically once the file is uploaded. The card is temporarily taken off-line.
•
The reboot process is complete once the status indicators for the
Card State
and
Connection
return to their
previous status.
If you are running DashBoard version 2.3.0 or lower, you must click
Reboot
in the
Device
tab to complete the
upgrade process.
Troubleshooting
If you encounter problems when upgrading your card software, verify the following:
• Ethernet cable is properly connected if you are uploading the file via a network connection.
• The file you are attempting to load is a
*.bin
file that is for the card you are upgrading.
Содержание openGear TSI-100
