Ross OpenGear HDC-8223A, Руководство пользователя

Страница: 31 / 80

HDC-8223A(-S) User Manual (Iss. 03) Operation • 4–7
As such set both SD ATC VITC Insertion and SD VITC Waveform Insertion to
Enabled
. In
Figure 4.7 , the line numbers are set to the default SMPTE 12M-2-2008 recommended values.
Figure 4.8 Insertion Settings
Example Case C
In this example, even though an ATC_LTC could be available to substitute for ATC_VITC not
being present, the HDC-8223A will refer to no timecode output since the choice of Disable
Output “out-prioritizes” ATC_LTC with the settings seen in
Figure 4.9 . The choices shown in
Figure 4.10 will allow ATC_LTC to “out-prioritize” Disable Output if ATC_VITC is not
available.
Figure 4.9 No Timecode Output Figure 4.10 ATC_LTC Priority Set