Ross openGear GPI-8941 Series, Руководство пользователя

Страница: 77 / 92

GPI-8941 User Guide (v9.0) RossTalk Protocol • 77
Module ID and Capabilities
These commands and responses allow the capabilities of the module to be queried.
Examples
Get all module status using verbose parameters. Verbose message return is on.
Get all module status using mixed verbose and terse parameters. Note the commands are not case sensitive and the
spacing around the colon does not matter. Verbose message return is on.
GPI 19:1:C Card replies GPI 19 is on. No configuration
response since auto-response is off.
GPI 19:0 Set GPI 19 inactive / low
GPI 19:0:E Card reports GPI 19 has had an event, this is
the trailing edge
Parameter
Description
Terse Verbose
Command
1 GPI GPI GPI command/message class
2 M ModuleQuery Module query command
3 T Type Request module type
I Inputs Request number of GPI inputs
O Outputs Request number of GPI outputs
A AllInfo Request all information
Response
1 GPI GPI GPI command/message class
2 M ModuleStatus Module status message
3 T Type Module type follows
I Inputs Number of GPI inputs follows
O Outputs Number of GPI outputs follows
4 GPI-8941 GPI-8941 Name of the module
# # Number of inputs
# # Number of outputs
Command:
GPI ModuleQuery : AllInfo
Response:
GPI ModuleStatus:Type:GPI-8941
GPI ModuleStatus:Inputs:16
GPI ModuleStatus:Outputs:16
Command:
GPI M:allinfo
Command Response Notes