Ross OpenGear DRA-8902 Series, Руководство пользователя

Страница: 30 / 44

4–2 • DashBoard Menus DRA-8902 Series User Manual (Iss. 02)
Status Tabs
This section summarizes the read-only information displayed in the Status tabs. The fields in the
Signal tab vary in severity from green (valid), yellow (caution), to red (alarm). DashBoard
reports the most severe alarm for a single field. Alarm colors are noted within the tables as text
set in brackets next to the menu parameter name.
Signal Tab
Table 4.1 outlines the read-only information displayed in the Signal tab.
Table 4.1 Signal Tab Items
Tab Title Item Parameters Description
Input Status
Input #
125M (MADI) (Green)
A MADI signal detected at 125Mbps is
present
270M (SD) (Green) A valid 270Mbps input signal is present
1.5G (HD) (Green) A valid 1.485Gbps input signal is present
3G (Green) A valid 2.97Gbps input signal is present
6G (Green) A valid 5.94Gbps input signal is present
12G (Green) A valid 11.88G input signal is present
Signal Not Locked (Green)
An input signal is present, but not locked
but the Invalid Signal alarm on the
Alarms tab is disabled.
Signal Not Locked (Red)
A valid input signal is detected and is not
locked
No signal (Green)
A valid input signal is not detected but the
Invalid Signal alarm on the Alarms tab is
disabled.
No signal (Red)
A valid input signal is not detected. The
Invalid Signal alarm on the Alarms tab is
enabled.
Cable Length
Input #
#
Indicates the approximate Belden 1694A
cable length used for the input signal
N/A
A valid input source was not detected on
the input BNC
Output Status
Channel #
OK (Green) A valid output signal is detected
Auto Failover (Green)
The Channel is in Failover mode (the
Loss of Input Failover box is selected in
the Setup tab) but the Failover alarm is
not enabled on the Alarms tab for the
channel.
Auto Failover (Red)
The Channel is in Failover mode (the
Loss of Input Failover box is selected in
the Setup tab) for the channel