2–6 • Installation
ADA-8402-B User Manual (Iss. 04)
Software Upgrades
The card can be upgraded in the field via the MFC-8300 series Network Controller card in your
frame.
To upgrade the software on a card
1.
Contact Ross Technical Support for the latest software version file.
2.
Display the
Device View
of the card by double-clicking its status indicator in the
Basic
Tree View
.
3.
From the
Device View
, click
Upload
to display the
Select file for upload
dialog.
4.
Navigate to the
*.bin
upload file you wish to upload.
5.
Click
Open
.
6.
If you are upgrading a single card, click
Finish
to display the
Uploading to Selected
Devices
dialog. Proceed to step 8.
7.
If you are upgrading multiple cards:
• Click
Next >
to display the
Select Destination
menu. This menu provides a list of
the compatible cards based on the card selected in step 2.
• Specify the card(s) to upload the file to by selecting the check box(es) for the cards
you wish to upload the file to.
• Verify that the card(s) you wish to upload the file to. The
Error/Warning
fields
indicate any errors, such as incompatible software or card type mismatch.
• Click
Finish
to display the
Uploading to Selected Devices
dialog.
8.
Monitor the upgrade.
• Monitor the upgrade progress bar displayed in DashBoard while the software is
upgraded on your card.
• The card(s) automatically re-boot and are temporarily taken off-line during the
re-boot process. The process is complete once the status indicators for the
Card
State
and
Connection
fields return to their previous status.
Note
— DashBoard version 3.0.0 or higher is required for this procedure.
Содержание openGear ADA-8402-A
