manualshive.com logo in svg

Ross NK-3G144, Руководство пользователя, Страница: 27 / 64

Поделиться
Скачать
Ross NK-3G144 Скачать руководство пользователя страница 27

NK-3G144 User Guide (v04)

Installation • 27

3. Connect a straight-through CAT5 cable between the 

T-BUS

 connector on the rear panel of the NK-3G144 and 

a 

T-BUS

 connector on the rear panel of a remote control panel or other control device, another NK Series 

routing switcher, or an NK-IPS (see 

Figure 4.3

).

If required, make a similar connection between the remaining 

T-BUS

 connector on the rear panel of the 

NK-3G144 and a 

T-BUS

 connector on the rear panel of another item of NK Series equipment.

4. Connect the power supply, or supplies, to the 

POWER

 connector on the rear panels of the NK Series 

equipment, if required.

5. Connect the cable from the power supply, or supplies, to a suitable AC mains supply.

The NK-3G144 is designed for installation into a standard 19" equipment rack. It has integrated rack ears, 
allowing it to be screwed in using standard screws and cage nuts.

Installing the Routing Switcher System in a Star-Layout

You may connect NK Series equipment to the NK-IPS in a star layout. The items are connected via the T-Bus 
control system. If any device connected directly to the NK-IPS is disconnected, it is only the downstream devices 
that become non-operational. All other devices remain operational.

Figure 4.4  NK Series equipment in a star layout

RCP-NKQ

Remote Control Panel

T-BUS

RCP-NKQ

Remote Control Panel

PSU

T-BUS

PSU

PSU

RCP-NKQ

Remote Control Panel

PSU

T-BUS

RCP-NKQ

Remote Control Panel

PSU

T-BUS

NK-3G144

Digital Video Routing Switcher

VID REF

T-BUS

NK-3G144

Digital Video Routing Switcher

VID REF

T-BUS

AC Mains

AC Mains

AC Mains

AC Mains

NK-IPS

Network Bridge

ETHERNET

POWER

Service
Port

T-BUS

NK Series 5V, 2A

Power Supply

NK Series 5V, 2A

Power Supply

NK Series 5V, 2A

Power Supply

NK Series 5V, 2A

Power Supply

Содержание NK-3G144

































































Отзывы:

Нет отзывов