manualshive.com logo in svg

Ross Master Control MC1-PANEL-16, Руководство пользователя, Страница: 44 / 58

Поделиться
Скачать
Ross Master Control MC1-PANEL-16 Скачать руководство пользователя страница 44

44 • Operation

MC1-PANEL-16 User Guide (v4.0)

mixed. If the source contains more audio channels that you want mixed, ensure to use the Mute setting for those 
channels. The Voice Over source is selected using the 

Audio Over Selection

 tab in the Configuration interface of 

the MC1-MK card. A Voice Over can also be triggered using GPIs.

For More Information on...

• setting up GPIs, refer to the 

MC1-MK Installation Guide

.

• setting the Voice Over duck/gain level, refer to the 

MC1-MK Operation Guide

.

Including a Voice Over

The Voice Over feature is triggered on/off by pressing the 

AUDIO

 

OVER

 button Once the button is selected (button 

is lit), the voice over will remain active until the button is selected again (button is unlit). 

For More Information on...

• selecting the source for your Voice Over, refer to the 

MC1-MK Installation Guide

.

Содержание Master Control MC1-PANEL-16



























































Отзывы:

Нет отзывов