Ross DRA-8204, Руководство пользователя

Страница: 16 / 40

2–4 • Installation DRA-8204 User Manual (Iss. 05)
Installing the DRA-8204
Use the following procedure to install the DRA-8204 in a DFR-8300 series frame:
1. Locate the Rear Module you installed in the procedure “ Installing a Rear Module ” on
page 2-3.
2. Ensure the Rear Module is the required one.
3. Hold the card by the edges and carefully align the card edges with the slots in the frame.
4. Fully insert the card into the frame until the rear connection plugs are properly seated on
the midplane and rear module.
5. Affix the supplied Rear Module label to the BNC area on the rear module.
This completes the procedure for installing the DRA-8204 in an DFR-8300 series frame.