Ross Carbonite Ultra Series, Руководство пользователя

Страница: 147 / 202

Description Location Event
Recall a shot on the selected camera as quickly as possible.
1.
Click Recall Shot (Fast).
2. Click the Camera button and select the device you want to send the
command to.
3. Click the Channel button and select the channel you want to send the
command to.
4. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
5. Enter the shot number you want to recall from in the Shot field.
Devices > Camera Robotic Camera —
Recall Shot Fast
Store a shot on the selected camera.
1.
Click Store Shot.
2. Click the Camera button and select the device you want to send the
command to.
3. Click the Channel button and select the channel you want to send the
command to.
4. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
5. Enter the shot number you want to store to in the Shot field.
Devices > Camera Robotic Camera —
Store Shot
GPI
Description Location Event
Set up the type of edge trigger for the GPI output.
1.
Click GPO Edge Duration
2. Click the GPO button and select the GPI output that you want to
configure.
3. Click the Change Type button and select whether you want to set
(Absolute) or reset (Reset) the parameter. Some selections will not be
available when you reset the parameter.
4. Enter the duration of the edge trigger in the Duration (fr) field.
Devices > GPO GPI Output — Edge
Trigger Setup
Set up the type of level trigger for the GPI output.
1.
Click GPO Level Config
2. Click the GPO button and select the GPI output that you want to
configure.
3. Click a Level to select whether the level trigger uses a high (High) or low
(Low) level trigger.
Devices > GPO GPI Output — Level
Trigger Setup
Select whether the level trigger GPI output act as a tally.
1.
Click GPO Mode
2. Click the GPO button and select the GPI output that you want to
configure.
3. Click a Mode button to select whether the level trigger GPI output, when
assigned to video source, acts as a roll clip (Normal) or as a tally (Tally)
for the selected source.
Devices > GPO GPI Output — Mode
Trigger a GPI output.
1.
Click GPO Trigger
2. Click the GPO button and select the GPI output that you want to trigger.
Devices > GPO GPI Output — Trigger
Ultra User Manual (v6.6) — Custom Control Events • 147