Ross Carbonite Ultra Series Скачать руководство пользователя страница 122

Страница: 122 / 202

MultiPanel

Each frame supports up to 3 independent

control connections (Main, Satellite 1, and

Satellite 2) as well as Satellite 3/SoftPanel. Each

connection, with the exception of SoftPanel, can

be from a control panel, DashBoard, or a

combination of the two. All devices on the same

control connection mirror each other.
The independent control connections are

selected by the port you connect to on the frame.

Multiple panels and DashBoard connections can

connect on the same port, but they will all share

the same permissions and mirror each other for

control.
• Main Panel — 5253
• Satellite 1 — 5255
• Satellite 2 — 5256
• Satellite 3/SoftPanel — 5257

Keep the following in mind:

Keep the following in mind when working with

MultiPanel:
• SoftPanel shares the permissions of the Main

Panel.

• The assignment of the panel ID is done from

the control panel.

• Control panel specific personality settings

are stored on the frame for the panel ID and

are not tied to the control panel.

• DashBoard automatically follows the main

panel but will ignore permissions set for the

main panel.

• If you change switcher modes, the MultiPanel

permissions may have to be set again.

• An undo of a memory recall ignores panel

permissions and will undo the last memory

recalled from any panel.

• Bus maps are specific to each control panel.

Creating or updating a bus map for one

control panel does not change the bus map

on another control panel.

• Custom controls ignore control panel

permissions and will run events on an ME,

MiniME

™

, or Canvas that the control panel

does not have permission for.

To Set Up MultiPanel Permissions

Tip:

MultiPanel permissions can also be set from the Ultritouch.

Click

Navigation Menu

Configuration

System

MultiPanel

Click a

Main

Sat 1

, or

Sat 2

button to select

whether that control connection has access

to that resource.

Note:

SoftPanel and Main share the same permissions.

Note:

A control panel must have permission to at least

one ME, MiniME

™

, or Canvas.

122 • MultiPanel — Ultra User Manual (v6.6)

Содержание Carbonite Ultra Series











































































































































































































Результаты поиска

Содержание Carbonite Ultra Series

Отзывы:

Ross Carbonite Ultra Series, Руководство пользователя, Страница: 122 / 202

Результаты поиска

Содержание Carbonite Ultra Series

Отзывы: