Control Panel Diagnostics
The control panel supports a number of diagnostic tests
that can be used to identify issues with your switcher.
These tests are designed to be used by Ross Video
Technical Support and other qualified Ross Video
personnel.
Installed Control Panel Boards
You can view the specifications of the Control Panel
CPU module, the current Operating System (OS) version,
and the status of the power supplies in the control panel.
To View the Installed Control Panel Boards
Press
HOME
>
Setup
>
Installed Options
>
Panel
Boards
.
The Board column lists all the boards installed in the
control panel, and their current status, as well as any USB
devices connected to the panel.
Module Tests
These tests allow you to test the functionality of the
knobs, buttons, faders, and positioner of the switcher, as
well as test the color of the buttons. Additional tests are
provided for the control panel displays and the memory
for each module.
To Perform a Button Color Test
The button color test allows you to test the LEDs in each
button on a module. Each Button LED on the module
illuminates, and then transition to the next LED, cycling
through the different colors. The brightness of the LEDs
is also be cycled between max and min brightness.
1.
Press
HOME
>
More
>
Diagnostics
>
Panel
Diagnostics
>
Module Test
.
2.
Press
LED Test
.
3.
Press the button that you want to test.
All buttons on the module should change at the same
time, and the colors and brightness should be
consistent.
To Perform a Button Function Test
The button function test allows you to test if the buttons
on the control panel are working properly or not. This
test requires you to press the button that you want to test
and the switcher reports where and what that button is.
1.
Press
HOME
>
More
>
Diagnostics
>
Panel
Diagnostics
>
Module Test
>
Device Test
.
2.
Press the button that you want to test.
The name or function of the button is listed on the
menu, as well as the module and hardware location
of the button.
3.
Confirm that the button you pressed is the one that
is shown on the menu.
4.
Double-press
Exit
.
To Perform a Stuck Button Test
The stuck button test allows you to identify any and all
buttons that the switcher reports as being stuck. A button
is considered to be stuck when it is held for more than
30 seconds.
1.
Press
HOME
>
More
>
Diagnostics
>
Panel
Diagnostics
>
Module Test
>
Stuck Buttons
.
2.
Any buttons that the switcher reports as being stuck
are listed on the menu. The button is identified by
the module it is on, as well as the label of the button.
To Perform a Fader Test
The fader test allows you to test the functionality of the
faders on the control panel. This test requires you to move
the fader that you want to test from one limit to the other.
The switcher reports where that fader is, and whether the
fader has been moved from one limit to the other.
1.
Press
HOME
>
More
>
Diagnostics
>
Panel
Diagnostics
>
Module Test
>
Device Test
.
2.
Move the fader that you want to test.
The illustration of the fader handle moves as you
move the fader on the control panel. The module
and hardware location of the fader are displayed on
the menu.
3.
Double-press
Exit
.
To Perform a Positioner Test
The positioner test allows you to test the functionality of
the positioner on the control panel. This test requires you
to move the positioner left and right, up and down, as
well as twist it. The switcher reports where that positioner
is, and how it is being moved.
1.
Press
HOME
>
More
>
Diagnostics
>
Panel
Diagnostics
>
Module Test
>
Device Test
.
2.
Move the positioner forward and backward, left and
right, and twist the knob.
An illustration of the positioner on the menus shows
the movement of the positioner. As you move the
positioner, the X, Y, and Z value for the positioner
are displayed.
3.
Double-press
Exit
.
94
• Control Panel Diagnostics — Acuity Setup Manual (v9.2)
Содержание Acuity 4410AR-020
Страница 1: ...Acuity Setup Manual v9 2...
