Ross Acuity 4410AR-020 Скачать руководство пользователя страница 88

Страница: 88 / 121

Frame Status

This region provides a list of all the critical components
in the frame and the health and status of them.

Panel Status

This region provides a list of all the critical components
in the master and satellite control panels and the health
and status of them.

Frame Boards

This page provides a list of all the boards in the frame
along with their part number, slot they are installed in,
and hardware version.

Status and Warnings

The operational status of all the critical components in
the switcher are monitored and reported. This provides
information on operating temperatures, hard drive
condition, fans, and power supplies.

Tip:

If the Switcher Status button on the quick navigation region

of the menu show a caution or failure symbol, you can press the
menu to go directly to the Status menu.

To View the Status of the Switcher

Press

HOME

Status

and select the type of status

information you want to view.

•

Complete Status

— view the status of all

components in the switcher.

•

Warnings

— view the status of only the components

that are indicating a warning.

Status Definitions

If a board, card, or power supply is not present in the
system, it is not shown on the list.

Table 15: Status Icons

Definition

Icon

Indicates that a component or condition is
operating properly.

Indicates that a condition is outside of the
normal operating parameters. For example, the
temperature inside the panel may be slightly
above or below the safe operating temperature.

Indicates a major problem with a component
or condition that the switcher is monitoring. For
example, the temperature inside the control
panel could be dangerously above or below the
safe operating temperature. The fail icon will
also indicate control panel modules that are not
properly assigned to rows.

Table 16: Status Definitions

Definition

Component

Are the 3D DVE cards in the frame operating
in the normal temperature range.

3D DVE Card
Temperatures

Is the 4RU Crosspoint or 8RU Crosspoint board
in the frame operating in the normal
temperature range.

Crosspoint
Board
Temperature

What is the status of the FlexDevice drivers
that are currently installed on the switcher. A
driver can be OK, Obsolete, or Unsupported.

Device Driver
Status

The status of the flash memory used for the
application on the Frame CPU.

Frame
Application
Flash

Are the internal communications between
components in the frame working properly.

Frame CAN
Bus

Are the cooling fans in the frame operating
normally, or have a number of fans failed.

Frame Fans

Is the graphics buffer FPGA operating in the
normal temperature range. If the graphics buffer
goes over temperature, it is shut down and a
warning message is shown on the display.

Frame
Graphics
Buffer FPGA
Temperature

Are there enough power supplies in the frame,
are they operating normally, or is one, or more,
of them failing. If the status for the power supply
is

Temperature not available

the temperature sensor in the power supply is
not functioning normally. A warning is displayed
if a power supply is drawing more than 50A,
indicating a possible problem with the power
supply or configuration of the frame. A popup
and warning is displayed if the current (Amps)
range across multiple power supplies is more
than 25A, indicating that load sharing may not
be functioning. Contact Ross Video Technical
Support.

Frame Power
Supplies

Are the power output and temperature of the
power supplies in the frame.

Frame Power
Supply

Are the fans in the frame power supplies
operating normally.

Frame Power
Supply Fans

A frame has been detected and is
communicating with the control panel. If the
message,

Unsupported frame

board configuration.

is displayed,

one or more of the boards in the frame is in the
wrong slot.

Frame Present

The status of the flash memory used for the
system functions on the Frame CPU.