2.
Click the
Video Router
tab.
3.
In the
Router Protocol
area, select the protocol you want to use to communicate with the router.
•
Probel SW-P-08
— select this option of your router uses the Snell Advanced Media
®
SW-P-08 protocol.
•
Quartz
— select this option if your router uses the Evertz
®
Quartz protocol.
4.
In the
Router Levels
field, select the number of levels that the router is using.
5.
In the
Router IP Address
field, enter the IP address of the router you want to control.
6.
In the
Router Port Number
field, enter the port on the router you want to connect to.
7.
Click
Connect to Router
to connect to the router.
8.
In the
Video Router Destinations
area, select which destinations on the router are connected to each video
channel input on the server. This is the physical connection from one BNC to the other.
9.
In the
Change Router Sources
area you can change which sources are being routed to the destinations that are
assigned to each video channel input on the server.
10.
Click
Apply
.
Audio Setup
You can select the number of audio tracks to record, which sources audio will use, and how audio is muted.
To Configure the Audio Setup
Select the number of tracks to record and which tracks are sent to the headphones jacks.
1.
Launch the
Tria Config
application.
You may be prompted to allow the program to make changes on the computer, click
Yes
.
48
• Server Configuration — Tria+ UHD User Manual
