Server Configuration
The
Tria Config
application allows you to configure various aspects of the hardware in your server. This includes video
input and output, audio, timecode, compression and serial communications. The number of channels and inputs and
outputs you have depend on the hardware installed in your server.
Important:
Not all settings are available on all servers or require a option to be purchased or installed.
Channel Setup
The hardware channels can be set up in a number of ways, depending on the task you need the server to perform.
Table 2: Video-Only / Video+Key Modes
Mode
Description
Two VA Channels
Two (2) background channel transports with audio.
One VKA Channel
One (1) keyer channel transport (video+alpha) with audio.
One ISO-2 Channel
Two (2) record channels (cameras or angles).
To Configure the Hardware Channels
The number of hardware channels on your server depends on the hardware configuration you purchased.
1.
Launch the
Tria Config
application.
You may be prompted to allow the program to make changes on the computer, click
Yes
.
2.
Click the
Channels
tab.
3.
4.
Click
Apply
.
Video Formats
To Configure the Video Format
The server can only operate in one video format at a time. All channel transports will play and record in the same format.
Note:
Not all video resolutions and frequencies are compatible. Some selections will be grayed out if they are not compatible.
1.
Launch the
Tria Config
application.
You may be prompted to allow the program to make changes on the computer, click
Yes
.
46
• Server Configuration — Tria+ UHD User Manual
