Ross Abekas Mira, Руководство пользователя

Страница: 9 / 73

to disable the playout function of the T-bar while you
select a playout speed.
• REVERSE
– press and hold
REVERSE
to reverse
the direction of playout.
• VAR PLAY
– press
VAR PLAY
play the clip at the
selected playout speed. The playout speed is shown
at the bottom right of the
Replay window.
Clip Control Area
• SEARCH – use the keyboard to enter the name of a
clip you want to find and press
SEARCH
. Press
EXIT to return to normal operation.
• NETWORK
– press
SHIFT
>
SEARCH
to open the
Select Event
menu. This list shows all the replay
events on the server, as well as the replay events on
any remote servers. The
Enable Network Video
option must be selected in Mira Config on both
servers to load a replay event from another server.
• LOAD
– press
LOAD
to load the selected clip in the
Clip Register. The selected playout channel goes into
Clip Play mode.
• BANK #
– use the keyboard to enter the number of
the Clip Register bank you want to use and press
SHIFT > LOAD .
• SAVE
– store the current live recording to a clip or
save the new in-point, out-point, and point of interest
(POI) to the clip for the current camera.
• TRIM ALL
– press
SHIFT
>
SAVE
to save the new
in-point, out-point, and point of interest (POI) to the
clip for all the cameras.
• ERASE – press ERASE to erase the current clip.
• RESTORE – press SHIFT > ERASE to undo the
last erase.
• GOTO IN
– press
GOTO IN
to jump to the in-point
of the clip.
Tip: press GOTO IN during LIVE EE mode to mark a point
of interest and rewind by the Auto-mark In-point offset
• GOTO POI
– press
GOTO POI
to jump to the point
of interest of the clip.
• GOTO OUT – press GOTO OUT to jump to the
out-point of the clip.
• PRE-ROLL – press SHIFT > GOTO IN , GOTO
POI
,
GOTO OUT
to jump to the start of the pre-roll
interval for the selected point.
• IN
– press
IN
to set a new in-point for the clip. The
button glows red when the clip is at the in-point.
• POI – press POI to set a new point of interest for the
clip. The button glows red when the clip is at the point
of interest.
• OUT – press OUT to set a new out-point for the clip.
The button glows red when the clip is at the out-point.
Navigate Area
• EXIT
– press
EXIT
to exit the current mode. The
indicator below the button pulses when the EXIT
button can be used.
• HI-LITE
– press
SHIFT
>
EXIT
to switch between
the Clip Register window and the Play List window.
• – press to move up one row in a menu or list.
• PAGE UP
– press
SHIFT
+ to move up one page
in a menu or list.
• – press to move down one row in a menu or list.
• PAGE DOWN
– press
SHIFT
+ to move down
one page in a menu or list.
Live EE Area
• – press to put the playout channel in LIVE-EE
mode. The output of the channel is the same as the
input.
Play List Area
• PLAY LIST — press PLAY LIST to put the selected
playout channel in Play List mode. The button flashes
in
PL EDIT
(Play List edit mode) and is solid
PLAY
LIST mode.
Mira Manual (v6.1) — Replay Overview • 9