Ross 9201DR-104-03, Руководство пользователя

Страница: 9 / 32

DETOUR User Guide (v3.0) Before You Begin • 9
Before You Begin
If you have questions pertaining to the operation of DETOUR, contact us at the numbers listed in “ Contacting
Technical Support ” on page 7. Our technical staff is always available for consultation, training, or service.
Overview
DETOUR is a is a 12G capable point of use distribution amplifier with relay bypass. The bypass relay allows the
unit to be used as a failsafe device to provide guaranteed on-air service in the case of a power failure.
DETOUR provides four active SDI outputs. This adds cable reach, signal conditioning and re-timing to MADI,
SD-SDI, HD-SDI, 3G-SDI and UHD-SDI signals.
A micro USB port provides an additional power source connection and may be configured as the alarm state
detection method. This is particularly useful when coupled with an Ultrix router. If Ultrix loses power, then the
USB connection between Ultrix and DETOUR can trigger the bypass state.
Four LED indicators show the alarm state, signal presence, USB power and main external power.
Simplified Block Diagram
Figure 2.1 Simplified Block Diagram of DETOUR Workflow
Features
DETOUR includes the following features:
• HD-BNC connectors enabling optimal signal quality
• Supports SDI data rates 270Mbps to 11.88Gbps
• Support for MADI audio transport
• Provides one micro USB port for power/fault detection
• Alarm general purpose output
• On-air failsafe operation in the event of power failure or primary input signal loss
• Dual power supply (USB and/or 5V universal adapter)
• Configure and monitor via DashBoard
• Small brick form factor
• 3-year warranty
SDI
IN
SDI
BYPASS
IN
CABLE EQ
SDI
OUT 3
SDI
OUT 4
SDI
OUT 1*
SDI
OUT 2
RELAY
*Or BYPASS OUT