Ross 4500DR-104-07, Руководство пользователя, Страница: 151 / 161

SRG-4500 User Guide (v7.0) PTP Option • 151
› 17 – 32
› 33 – 48
› 49 – 64
› 5 – 80
› 81 – 96
› 97 – 112
› 113 – 128
Connection Logs and Statistics Tables
• Clear PTP Connection Logs and Statistics Tables — CONFIRM - Click to confirm
• View Connections — Choose from Groups of 16 (1 – 256).
• IP address of connected device — Connection Alive Duration (Lifetime)
• Displays IP address of connection — Displays lapsed time
• Delay Request Count (Lifetime) — Delay Requests per sec (Current)
• Displays number of delay requests — Displays number of delay requests per seconds
PTP Follower Configuration
This section provides information on the menus and options when the SRG-4500 is set to PTP Follower mode.
By default, the options are displayed in the Simple View. In Simple View, basic information relating to the PTP
port, the selected mode, and default settings are displayed. Essential settings are displayed only (details can be
displayed when the Detail View box is selected). When a profile is selected, all settings associated with that profile
are automatically set according to the SMPTE and AES recommendations.
To display the PTP Follower options in DashBoard
1. Navigate to the Slot 16 System Setup interface.
2. Select the Network tab.
3. Select the PTP sub-tab (located at the bottom of the Network tab).
4. Locate the PTP Follower area.
By default, the Detail View box is cleared (unselected) and the PTP options are in Simple View.
5. Use the PTP - IP address of this SPG field to set the IP Address of the
GbE/PTP
port.
6. Use the PTP - IP sub net mask field to set the IP sub net mask of the
GbE/PTP
port.
7. Use the PTP – IP gateway address field to set the IP gateway address of the
GbE/PTP
port.
8. Use the Mode menu to specify the preferred PTP mode of operation. Choose from the following:
• Off
• PTP Multicast Follower
• PTP Mixed Mode Follower
• PTP Grandmaster (Active)
• PTP Grandmaster (Passive if not selected by BMCA))
9. Use the Domain field to select a value for Domain (0 – 127).
10. Use the PTP Profile field to select the required PPTP Profile. Choose from the following:
• IEEE1588 (default)
• SMPTE-2059: 2015
• AES67-R16: 2016