background image

2

2‑4

HEALTH AND SAFETY

OL1D-SM-GB02D

2.5 

Precautions and protection 

for personnel

2.5.1 

Personal hygiene

Personal hygiene is important at all times, particularly 
for those working in the waste disposal environment 

where rats can breed and spread diseases such as 

LEPTOSPIROSIS

.

Leptospirosis

, or Weil’s disease, is a form of jaundice 

with early stages similar to influenza. The infection 

sometimes enters the body through breaks in the 
skin, so thorough first aid treatment of all wounds is 
important. 

Leptospirosis

 is carried in the urine of rats. If you 

have the slightest suspicion that you are working in a 

contaminated environment follow these rules rigidly:
1.  Wear protective clothing at all times.
2.  Do not allow the inside of protective clothing to 

become soiled.

3.  After removing protective clothing wash it 

thoroughly and allow to dry. 

4.  Wash hands and forearms thoroughly after working 

and especially before eating and drinking.

5.  Wash every scratch, graze or cut of the skin, treat it 

with antiseptic, and cover it with a sterile dressing, 
e.g. plaster. This applies to ALL wounds; not just 
those suffered at work.

6.  If the First‑Aid kit requires replenishing, report it to 

your supervisor.

7.  With any injury that is more than a scratch or slight 

cut, consult your doctor and mention the type of 

work you do.

8.  Do not rub your mouth, nose or eyes when 

working.

9.  At all visits to your doctor, mention the type of 

work you do and the environment you work under.

10.  Apply barrier creams before each work period.

Note:

 Preparations containing lanolin replace the 

natural skin oils which can be removed when washing.
11.  Do not wash skin with fuels, thinners or solvents.
12.  Obtain medical advice if skin disorders develop.

2.5.2 

Protective clothing

1.  Use and take care of all personal protective 

clothing and equipment supplied by your employer 
for your safety. 

2.  While operating or carrying out maintenance on a 

refuse collection vehicle, wear protective clothing 

complying with health and safety legislation and 
standards applicable to the country in which the 

vehicle is being used, including: 

•  A boiler suit, or a two piece protective overall, 

not too loosely fitting and of a distinctive 
colour.

•  Protective boots or shoes with steel toe caps 

and in‑soles.

•  A hard protective hat.

•  Protective gloves.

•  Protective spectacles.

•  Goggles and particle mask if working in dusty 

conditions.

•  Suitable eye protection to protect eyes from 

welding flash or sparks from grinding.

•  Reflective armbands or jacket when working on 

the road.

3.  Wear impervious gloves where there is a risk of 

contact with hydraulic system oil.

4.  Wear eye protection (chemical goggles or face 

shields) where there is a risk of eye contact.

5.  Avoid contaminating clothes and protective 

equipment with oil:

6.  Do not put oily rags in pockets.
7.  Clean overalls regularly.
8.  Discard unwashable or oil impregnated clothing.
9.  Do not wear loose fitting clothing whilst operating 

or carrying out maintenance on the vehicle. 

10.  Always remove all personal jewellery, e.g. rings, 

watches, chains etc., before commencing operation 
or work on the vehicle.

11.  Tie long hair back from the face.

Содержание Dennis Eagle Olympus









































































































Отзывы: