Hardware Connection
1
MODEL NO.
RNX-N600PCE_v2.0
You may see the
Found New Hardware Wizard
(Found
New Hardware)
after the adapter has been inserted.
Please click
Cancel
.
Package Contents
System Requirement
· Windows XP · Windows Vista · Windows 7 · Windows 8
QIG
Resource CD
For Windows Vista
Quick Installation Guide
1
Insert the Resource CD into the CD-ROM drive.
Double-click Computer, and then double-click the
CD/DVD Drive where the installation CD was placed.
Open
RNX-N600PCE_v2.0
folder, and double-click
Setup.exe
to begin.
2
Select
Install Rosewill Wireless Configuration
Utility and Driver
and then click
Next
.
4
5
Click
Change
to specify the destination location
or you can leave it default. Click
Next
to continue.
6
Click
Install
to install the driver and utility for your
adapter.
Software Installation
2
(The installation procedures in Windows XP/ Vista/ 7/ 8 are similar. Here we use the procedures in Windows 7 as an example.)
The following screen will then appear.
Click
Finish
to complete the setup.
8
7
The installation process may take 1-2 minutes.
The
InstallShield Wizard
window will appear.
Click
Next
to continue.
3
For Windows XP
N600 Wireless Dual Band PCI Express Adapter
Steps
:
1. Turn off your computer and unplug the power cord from the computer.
2. Open the case. Locate an available PCI Express slot and remove its slot cover.
Keep the screw.
3. Insert the adapter into the PCI Express slot as shown above.
4. Secure the adapter with the screw removed in Step 2.
5. Close the case and insert the power cord back into the computer.
6. Turn on your computer.
RNX-N600PCE_v2.0
7109504761 REV1.0.0
MODEL NO.
RNX-N600PCE_v2.0
Quick Installation Guide
N600 Wireless Dual Band PCI Express Adapter
