PW-AC5530U
AC1200 Wireless Dual Band USB Adapter User Guide
15
4. When the following window appears, you have successfully connected to the network.
Figure 3-10
3.2.2 PIN method
There are two ways to configure the WPS by PIN method:
1) Enter the PIN from your Router or Access Point.
2) Enter a PIN into your Router or Access Point.
Following are the detailed configuration procedures of each method.
3.2.2.1. Enter the PIN from your Router or Access Point
1. Open AR171 Wireless Configuration Utility and click
WPS
tab. Select
Enter the PIN of my
access point or wireless router
. In the empty field beside PIN, enter the PIN labeled on
the bottom of the router (here takes 13492564 for example). If you have generated a new
PIN code for your router, please enter the new one instead. Click
Connect
to continue.
Figure 3-11
2. The adapter will be connecting to the target network.
