Rosen Aviation
10.4” Display on Manual Lift
Document Number: 101844
Revision: D
Date: 05/20/10
Template: 4.2.3-6-FM; Revision A; 16 May, 2005
Page 17 of 25
4.3.1. Technician Menu
Image Adjustments Menu
(
Composite only
.) Use the following options to adjust the intensity of the three primary
colors when running the display in composite mode.
Figure 27 Image Adjustments menu and soft keys
4.3.1.1. Red
Adjusts the low-level registers of the red values in the picture.
From the Technician Menu
Image Adjustments Menu, press the
▼
soft key to select
Red
and then
OK
, as shown below.
Press the
◄
soft key to show more cyan tones or
►
to intensify the red tones.
Press the
Set
soft key to set the value and exit the screen.
Figure 28 Red settings and soft keys
4.3.1.2. Green
Adjusts the low-level registers of the green values in the picture.
From the Technician Menu
Image Adjustments Menu, press the
▼
soft key to select
Green
and then
OK
, as shown below.
Press the
◄
soft key to show more magenta tones or
►
to intensify the green tones.
Press the
Set
soft key to set the value and exit the screen.
Figure 29 Green settings and soft keys
