Rosemount OCX 8800, Инструкция по эксплуатации

Страница: 31 / 266

Instruction Manual
IM-106-880, Rev 2.1
April 2017
OCX 8800
2-3
Enclosures
The OCX 8800 enclosures are designed to meet ingress conditions of Type
4X and IP66 (when reference air vents are routed to a dry area). Each
enclosure cover is threaded to its base and sealed with an o-ring that isolates
the threads from external contaminants.
Each cover is secured by a clip attached to the base that engages the cover
between the ribs of the cover sidewall. The clip is held in place by an Allen
head cap screw and lockwasher mounted in a recess. Cover removal and
installation requires an Allen wrench to loosen and tighten the screw.
Figure 2-1. Installation, OCX 8800 with Integral Electronics
Table 2. Installation/Removal
Probe Dim “A” Dim “B”
3 ft
6 ft
9 ft
18 in.
(2235)
88
(3150)
124
(2743)
108
72
(1829)
(914)
36
(1321)
52
(864)
34
(457)
18
Flange
Dia.
DIN
ANSI
6.00
(152)
BOTTOM VIEW
B.C. Dia.
Dim “B”
Removal Envelope
37390008
Dim “A”
Insertion Depth
Flange Dia.
Hole Dia.
Allow 9 in.
(229 mm) for
Cover Removal
Optional
In Situ Filter
Table 1. Mounting Flange
Hole
Dia.
(4) Holes
equally
spaced on
B.C. dia
7.28
(185)
0.75
(19)
0.71
(18)
4.75
(121)
5.71
(145)
3535B18H02
3535B45H01 DIN
ANSI
0.06 In. Thick Gasket
Insulate if exposed to adverse weather or extreme temperature changes,
install a protective housing and/or insulation around the unit.
NOTE
All dimensions are in inches with millimeters in parentheses.
*
*4.0 (101.6) with high surface
Stainless Steel Filter
*7.3 (186.4) with Stainless Steel
or Hastelloy Filter