Rosemount FISHER-ROSEMOUNT 244EH, Руководство по эксплуатации продукта

Страница: 18 / 60

Rosemount Models 244EH and 244ER PC-Programmable Temperature Transmitters
2-10
Choose the procedure that matches the operating system you are using.
Procedure for Windows 3.1 or Windows for Workgroups 3.11
1. If you do not have Win32s installed, install it now. Follow the
instructions on the diskette label.
2. Insert the Models 244EH and 244ER Configuration Software
diskette into your floppy disk drive.
3. In the File Manager, choose RUN from the FILE menu.
4. The RUN dialog box appears. In the COMMAND LINE text box,
type
<drive>:\setup
. Substitute the letter of your floppy disk drive
(usually a or b ) for <drive>. Click OK .
5. The WELCOME window appears. Click OK .
6. The SELECT DESTINATION DIRECTORY window appears. To
accept the default installation directory, click
OK
. To specify a
different installation directory, either type a new directory path in
the
DESTINATION DIRECTORY text box or select one from the list.
Click OK .
7. The
COMM SETTINGS
window appears. In the
COMM PORT
drop-down box, choose the communication port to which you
intend to connect the Model 244EC. Click
OK .
8. The SELECT PROGRAM MANAGER GROUP window appears. To
accept the default Program Manager group name, click
OK
. To
specify a different group name, either type a new name in the
GROUP NAME text box or select one from the list. Click OK .
Procedure for Windows 95 or Windows NT
1. Insert the Models 244EH and 244ER Configuration Software
diskette into your floppy disk drive.
2. Click the START button on taskbar. Click RUN .
3. The RUN dialog box appears. In the OPEN text box, type
<drive>:\setup
. Substitute the letter of your floppy disk drive
(usually a or b ) for <drive>. Click OK .
4. The SELECT DESTINATION DIRECTORY window appears. To
accept the default installation directory, click OK . To specify a
different installation directory, either type a new directory path in
the
DESTINATION DIRECTORY
text box or select one from the list.
Click OK .
5. The COMM SETTINGS window appears. Choose the
communication port to which you intend to connect the
Model 244EC from the
COMM PORT
drop-down box. Click
OK
.
6. The SELECT PROGRAM MANAGER GROUP window appears. To
accept the default Program Manager group name, click OK . To
specify a different group name, either type a new name in the
GROUP NAME text box or select one from the list. Click OK .