Rosemount 3244MV, Справочное руководство

Страница: 18 / 62

Reference Manual
00809-0100-4799, Rev BA
September 2002
Model 3244MV
2-10
SET THE SWITCHES
Security
After the transmitter is configured, it is possible to protect the configuration
data from unwarranted changes. Each transmitter is equipped with a security
switch that can be positioned “ON” to prevent the accidental or deliberate
change of configuration data. The switch is located on the front side of the
electronics module and is labeled SECURITY (see Figure 2-9).
Simulate
The simulate switch is used in conjunction with the Analog Input (AI) function
block. This switch is used to simulate the temperature measurement and is
used as a lock-out feature for the AI function block. To enable the simulate
feature, the switch must transition from “OFF” to “ON”
after power is applied to
the transmitter (see Figure 2-9). This feature prevents the transmitter from
being accidentally left in simulator mode.
Figure 2-9. Transmitter
Switch Locations.
ON OFF
3244MV
-02
04J02A