Rosemount 3244MV, Справочное руководство

Страница: 27 / 62

Reference Manual
00809-0100-4799, Rev BA
September 2002
Model 3244MV
3-9
47 SENSOR_CAL_DATE The last date on which the calibration was
performed R/W Date 7
48 SENSOR_CAL_WHO The name of the person responsible for the last
sensor calibration R/W Octet(32) 32
49 SPECIAL_SENSOR_RO Special sensor matching coefficients – Ro Value
(Callendar-Van Dusen sensor matching) R/W Float 4
50 SPECIAL_SENSOR_A Special sensor matching coefficients – A Value
(Callendar-Van Dusen sensor matching) R/W Float 4
51 SPECIAL_SENSOR_B Special sensor matching coefficients – B Value
(Callendar-Van Dusen sensor matching)
R/W Float 4
52 SPECIAL_SENSOR_C Special sensor matching coefficients – C Value
(Callendar-Van Dusen sensor matching) R/W Float 4
53 A2D_CONVERSION_INFO
Indicate whether the input power has 60 Hz or 50
Hz line cycle
R/W Unsigned8 1
0 = “60 Hz,” Choose this if the input power has 60
Hz line cycle
1 = “50 Hz,” Choose this if the input power has 50
Hz line cycle
54 RJ_UNIT Unit of the reference junction temperature R/W Unsigned16 2
55 MODULE_SN The A/D module serial number R Octet(32) 32
56 TB_COMMAND_STATUS
Transducer board command status
R Unsigned8 1
0 = no Command Active
1 = Command Executing
2 = Command Done
3 = Command Done: Errors
57 A2D_BRD_SN A/D board serial number R Unsigned32 4
58 A2D_BRD_HARDWARE_REV A/D hardware revision R Unsigned8 1
59 A2D_BRD_SOFTWARE_NUM A/D software revision number R Unsigned32 4
60 A2D_SOFTWARE_REV Software revision R Octet(48) 48
61 CJC_CALIBRATION The CJC calibration value R/W Float 4
62 RTD_OFFSET_COMPENSATION
RTD offset compensation
R/W Unsigned8 1
0 = “Disabled,” Choose this if you want offset
compensation disabled
1 = "Enabled," Choose this for normal operation
and the best open sensor diagnostics.
63 CALIBRATOR_MODE
Calibrator mode. Used to determine the mode of
the calibration logic
R/W Unsigned8 1
0 = "Disabled," Choose this if you are doing an
input trim to minimize interaction between the
device and the calibration hardware.
1 = "Enabled," Choose this or normal operation and
the best open sensor diagnostics
PA Index
Number
Parameter Description Access
Data Type/
Structure Size –
Bytes