Rosemount 2240S, Справочное руководство

Страница: 73 / 100

Reference Manual
300550EN, Rev AA
December 2010
6-15
Rosemount 2240S
Section 6. Service and Troubleshooting
6.3.1 Device Status
Table 6-4 shows a list of device status messages for the Rosemount 2240S
Multi-input Temperature Transmitter. Messages may appear on the display of
a Rosemount 2410 Tank Hub, and in the Rosemount Tankmaster program
(See “Viewing Input and Holding Registers” on page 6-2 for more information
on how to view Input registers).
TankMaster WinSetup is a useful tool for diagnostics and troubleshooting a
2240S transmitter. The
View Input Registers function allows you to view the
current device status and search for the root cause of warnings and errors.
Figure 6-7. Device Status Input
Registers in TankMaster
WinSetup
Detailed information about device status can be found in Input Registers
100
(1)
to 112 as shown in Table 6-4.
Table 6-4. Status registers for
the 2240S Multi-input
Temperature Transmitter
(1) Note that Input Register data from the 2240S transmitter is temporarily stored in the Input
Register database of the 2410 Tank Hub. The Input Registers presented in TankMaster
WinSetup refer to the internal register area of the 2410. Therefore, for tank 1 you will have to
add 10000 to the 2240S internal register number as given by Table 6-4 in order to find the
register presented by WinSetup. For tank 2 (requires a 2410 with the multi-tank option) you
will have to add 12000, for tank 3 you will have to add 14000, and so on.
Device status
Message Description Action
Device Status Input register no. 100
(1)
.
Bit 1: device warning
Bit 7: device error
Bit 8: simulation mode active
Bit 9: PTB mode active
Bit 10: PTB resistance out of limit
Bit 15: invalid measurement
Bit 18: device write protected
Bit 19: factory setting used (default
database)
Contact Emerson Process
Management/Rosemount TankGauging
service department for support.