25
5.7 Switching bike lights on/off
Switching your bike lights on/off with Kiox
You can use the
button on the on-board computer to
simultaneously switch the front and rear light on and off (if present).
The light symbol
is displayed when the light is on.
Switching the bike lights on and off has no effect on the backlight of
the display.
Switching bike lights on/off with the SmartphoneHub
Press and hold the “
+
“ button to switch front and rear light on/off.
You can also switch on/off the light via the app.
A symbol on the display of the SmartphoneHub or in the app shows
you whether the light is switched on or not.
5.8 Switching the walk assist function on/off
The walk assistance may help you push your e-bike. The assistance
provided depends on the selected gear and may reach up to 6 km/h. The lower the selected gear, the lower the speed
in the push assistance mode (at full power).
Only use the walk assist function when pushing the e-bike. There is a risk of injury, if the wheels of the e-bike are not in
contact with the ground while using the walk assistance.
Briefly push the
button on the control unit to activate the walk
assistance. Push the “
+
” button within 3 secs after activation and hold
it down.
→
The e-bike drive is activated.
Note: You cannot activate the walk assist function when assistance
is switched “
OFF
“.
The walk assistance will switch off, if:
• you release the “
+
” button,
• the wheels of the e-bike are locked (e.g. through braking or
knocking against an obstacle),
• the speed exceeds 6 km/h.
+
–
+
