Rose electronics QuadraVista QF Скачать руководство пользователя страница 71

Страница: 71 / 104

QuadraVista QF Manual

USB DEVICE 1

4 Menu

The QuadraVista QF supports and switches transparent USB 2.0 devices such as printers, cameras, 3D mice,

fingerprint readers, and external memory. A sample application for this feature can be as follows. Connect a

memory stick to unit, copy data from a connected computer to the stick and from the stick to another

connected computer. This allows data to be copied between computers without being networked.

Navigate to the

USB DEVICE 1-4

menu item in the

COMPUTER

menu using the arrow keys, and press the

Enter

key /

SELECT

button to open the

USB DEVICE 1-4

window.

Figure 81. COMPUTER / USB DEVICE 1-4 Window

The

Status of the transparent USB 2.0 switch

field displays the status of the connections from the USB ports to

the computers. This field has two settings for each USB 2.0 port.

■

off:

The USB 2.0 port is not switched to a computer. A USB device may be connected, but it has not been

switched to a computer.

■

Computer (1-4):

The USB 2.0 port is switched to one of the named computers.

The

Change port settings

field is used to reassign the USB 2.0 ports between the computers. Use the

▲

▼

buttons to select one of the four USB ports and open its submenu by pressing the

Enter

key /

SELECT

button.

This will open the

USB DEVICE

window.

Figure 82. COMPUTER / USB DEVICE 1-4 / USB DEVICE Window

Содержание QuadraVista QF









































































































Результаты поиска

Содержание QuadraVista QF

Отзывы:

Похожие инструкции для QuadraVista QF

Бренды по названию

Популярные бренды

Rose electronics QuadraVista QF, Инструкция по установке и эксплуатации

Результаты поиска

Содержание QuadraVista QF

Отзывы:

Похожие инструкции для QuadraVista QF

Бренды по названию

Популярные бренды