QuadraVista QF Manual
55
When audio output is active, the
Select audio from
selection determines which channel will provide the audio
output.
To ensure that the audio is always sourced from the computer currently being operated, select the
active
channel
option from the list. Alternatively, to specify a fixed audio source, select one of the channels from the
list.
When the
Switch channel on audio activity
field is checked, the QuadraVista QF automatically switches to a
channel on which an audio signal is detected.
By navigating to the
Volume
button in the
COMPUTER
AUDIO
window and pressing the
Enter
key /
SELECT
button, the
VOLUME
window can be opened where the audio output level for each channel can be
set.
Figure 73. AUDIO / VOLUME Window
The audio volume can be adjusted in 2 dB increments. Use the
+
and
–
keys on the keyboard to change the
volume for each channel.
Note:
The
AUDIO
VOLUME
window can also be opened with the hotkey combination “<Hotkey>” + “
+/-
”.
