Rose electronics Orion XTender OR2-SRDFSUD1D, Инструкция по установке и эксплуатации, Страница: 54 / 79

Orion Extender Installation and Operation Manual 51
Transmitter Settings
The following settings can be written to the configuration file of a Transmitter.
Setting Function
DDC Management
LOCKEDID Activate DDC write protection
Digital Audio (only with digital audio upgrade module)
SRC32000 Activate sample rate conversion, sample rate 32 kHz
SRC44100 Activate sample rate conversion, sample rate 44,1 kHz
SRC48000 Activate sample rate conversion, sample rate 48 kHz
SRC96000 Activate sample rate conversion, sample rate 96 kHz
SRC_NONE Deactivate sample rate conversion
Compression
MEDCPRATE Activate medium compression rate
MINCPRATE Activate low compression rate
MAXCPRATE Activate high compression rate
ENADITHER Activate dithering filter for Mac OS systems
Shared Operation
RELEASETIME=n
Release timer n = 0...9 seconds for Mouse and Keyboard Connect;
If setting not present = 2
Table 16. Transmitter Configuration File Settings
Receiver Settings
The following settings can be written to the configuration file of a Receiver
Setting Function
1080p50Hz Always display 50 Hz when using 1920x1080
DISEXTOSD Deactivate extender OSD
ENAFRAME Show orange colored frame when losing extender connection
ENAHOLDPIC
Show last transmitted picture highlighted by an orange colored frame when losing
connection
ENALOSTMR Activate LOS timer
ENADDCTX
Activate DDC transmission by unplugging and connecting the monitor back to the
CON Unit
CENTERMODE
Simulate the native resolution of Dual-Link monitors by an additional black frame in
order to enable Instant Switching (on models with Dual-Link cards only).
PARAM=V Simultaneous output of DVI-D and VGA signal (on models with VGA cards only)
ENAAUDIO Enable RS232 or RS422 and analog audio during video only connections
DISPLAY2
Show video channel 2 per default when switching to the respective Dual-Head unit (on
models with Dual-Head cards only
Table 17. Receiver Configuration File Settings