Orion Extender Installation and Operation Manual
48
The 'Hot Key' sequence to enter Command Mode can be changed. The following table lists the 'Hot Key'
Codes for the available key choices.
'Hot Key' Code 'Hot Key'
0
Hot Key can be selected by user
2
2x <Scroll>
3
2x <Left Shift>
4
2x <Left Ctrl>
5
2x <Left Alt>
6
2x <Right Shift>
7
2x <Right Ctrl>
8
2x <Right Alt>
Table 14.Hot Key' Options
Set user-defined 'Hot Key'
When setting a user-defined 'Hot Key' (e.g. 2x<Space>), ‘Hot Key’ Code 0 is used. For example, to set
<Space> as the ‘Hot Key’, the following keyboard sequence would be used:
<current 'Hot Key'>, <c>, <0>, <Space>, <Enter>.
Reset ‘Hot Key'
In order to set a ‘Hot Key' back to the default settings of the extender, press the key combination
<Right Shift>+<Del> within 5 seconds after switching on the CON unit or plugging in a keyboard.
DDC Settings
By default, data from the factory preset internal DDC information is communicated to the video source
(computer, CPU). If these settings are not optimal for the display device, the DDC information of the console
monitor can be downloaded and stored internally.
Alternately, for certain special requirements, the DDC information can be retrieved and uploaded as a binary
file to both the CPU Unit and the CON Unit. Both these options are described below.
Downloading DDC Information from Console Monitor
On all KVM Extenders with USB-HID support, the user can load the DDC information of the console monitor
using a keyboard command while the extenders are in operation.
1. Enter Command Mode with the 'Hot Key', as described above.
2. Press the <a> key to download the DDC information from the console monitor. The screen will go blank
for a short time. Command Mode ends and the keyboard LEDs return to their previous states.
3. Restart the video source (computer, CPU). The video mode will be readjusted, and the screen quality
should be optimal. The CPU should now show the console monitor as the current screen, together with
its available video resolutions.
This operation can be repeated as necessary if the console monitor is changed.
Содержание Orion XTender OR2-SRDFSUD1D
Страница 78: ......