35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
The RoPole is a registered trademark of Rose Displays, Ltd. Neither
the manufancurer nor any sales agent may be held liable for injury, loss
or damage resulting from the use of these products. Part #INSSPRP
To install
Assemble poster, sign holders, hooks and anchor onto RoPole head
(see illustration). Rest heel of RoPole on floor. Loosen telescopic
joints and extend pole to the ceiling. Lock the RoPole joints. If you
have the spring lock RoPole press button on pole, raise upper part
of pole until button snaps into the desired stop determined by the
ceiling height. Line up the wings of the RoPole head under the
ceiling grid (Fig. 1). Push up lightly against the grid. Twist the
RoPole to the right until the anchor locks.
To remove
Rest heel of RoPole on floor. Loosen telescopic joints and extend
pole to the ceiling.
Firmly
lock the RoPole joints.
Line up RoPole head parallel with grid as shown (Fig.2). Push up
lightly. With the anchor engaged in the RoPole head, turn the
RoPole to the left until the anchor releases. Lower slowly.
Sign
RoPole
Ceiling
Sign
Spider
Head
Helpful Hints
•
Practice makes perfect!
•
Those not yet familiar with the RoPole should first practice
installing and removing the anchor from the ceiling without a
poster a few times. Keep the RoPole vertical and directly
beneath the anchor.
Spider RoPole
®
Instructions
Ceiling Grid
Wings
Figure 2
Anchor Head
Wings
RoPole
head
Sign
Holder
Anchor
Hook
Clip
Ceiling Grid
Wings
Figure 1
Anchor
