The AnoKiosk™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products. Part
#02INAnoKioskRigidStackable
Incept-09.20.02
Instruction Sheet
Note:
We recommended that two people
assemble this kiosk.
Step 1a
Slide spine into vertical rail.
Step 1b
Slide another vertical rail onto the
other edge of spine. Repeat for all
vertical rails and spines.
Step 2
Carefully insert corner brackets into
ends of bottom rails, using thumb as
shown in illustration. Two brackets
per end of each rail. Bracket can
bend if forced.
Detail- It is important that the corner
bracket tension tab faces toward
outside of frame. (2b)
Step 3
Lay out parts as they will be configured
on the floor.
Note: One kiosk will have Base Rail
other(s) will have stacker bar.
AnoKiosk™
Instructions for Assembly
Kiosk spine
Corner brackets
Parts
Single rails
Split rails
(Continued on other side)
2a
2b
1a
1b
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
Bottom Rails
with Base Rail
3
3-Way
4-Way
Bottom Rails
with Stacker Bar
