Parts
Instructions for Hanging
Incept-8.23.02
AnoGotcha
™
is a trademark and Gotcha
®
is a registered trademark of Rose
Displays, Ltd. Neither the manufacturer nor any sales agent may be held
liable for injury, loss or damage resulting from the use
of these products.
Part #02INSIMAnoGCableandSaucer
4
End Caps
06-5545
2
T-Top Gotcha
2
AluGotcha Shell
12AG400SQ
Instruction Sheet
AnoGotcha™
Step 1
Insert T-Top Gotcha Holder into the
AnoGotcha Shell.
Fig. 1
Step 2
Insert saucer into top rail of the holder.
Note: It is easiest to slide the saucer into the
holder if you hold the Loop as close to the
saucer as possible.
Fig. 2
Step 3
Push end caps into place.
Fig. 3
Step 4
Snap the AnoGotcha Holder completely open
so that hinge is turned up as far as possible.
Insert poster into holder until top of poster
meets top of holder. To close snap the
AnoGotcha Holder shut.
Fig. 4
Step 5
Suspend poster.
Fig. 5
Important note:
Please save and reuse the AnoGotcha Holder,
End Caps, and Cable and Saucer for future
projects.
Figure 5
Figure 1
Figure 2
2 Cable and
Saucer
16-0018SS
Figure 3
Figure 4
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:[email protected]
