13
Trouble Shooting
Always check the TOP TENS™ and accessories before use to prevent damage and defects; these are
some of the simple checks:
1.
Make sure the battery has sufficient charge and is in proper condition.
2.
Make sure the lead wires fit tightly into the connection sockets of the TOP TENS™. The table
below shows some common defects. If you cannot remedy the defects as described, contact your
TOP TENS™ unit provider if it is not possible to remedy in the manner described.
Defect
Cause
Remedy
The TOP TENS™
does not turn on
No battery or bad battery
Replace battery
The TOP TENS™
turns on and then off
again
Battery not inserted
properly
Insert battery
again Replace battery
Battery life expired
Replace battery
The TOP TENS™
turns on, but does
not generate electric
pulses
Lead wires faulty
Replace lead wires
Lead wire not connected
properly
Connect lead wire properly
Treatment time has
expired
Switch unit to the OFF
position and switch back
on.
Note:
If there is any other problem, please contact your authorized TOP TENS™ distributor.
