- 6 -
Fog Button
Press and release to
start making fog.
Press and release again
to stop making fog.
Not required when
using DMX control.
Note: The Fog Button
is disabled if Standby
mode is engaged.
Standby Button
Press and release to suspend
heating and operation of the
machine without turning off
the Main Power Switch. The
Power Indicator light on the
Remote Control Panel will go
out when in Standby mode.
Press and release again to
disengage Standby mode.
Once Standby mode is disen-
gaged, the Power Indicator
light on the Remote Control
Panel will come back on.
Timer Button
Press and release to engage the timer
control functions. Timer Indicator
light will come on. Press and release
again to disengage timer functions.
Timer Indicator light will go out. Note:
The Timer Button disabled if Standby
mode is engaged.
Fog Level Knob
Rotate to set the desired
amount of fog output. Higher
numbers indicate more fog.
Output is controlled by pump
speed increasing and sending
more fog fluid into the
heat exchanger.
Fog On Knob
Used only when timer control
is engaged. Rotate to set the
desired time interval that the
machine will produce fog.
During fog production, the
Power Indicator light will flash.
Fog Off Knob
Used only when timer control
is engaged. Rotate to set the
desired time interval that the
machine will wait while NOT
producing fog.
Timer Indicator
A green indicator light that
illuminates when Timer mode
is engaged by pressing the
Timer Button. Turns off when
Timer mode is disengaged.
Power Indicator
A red indicator light
that illuminates when
the Main Power Switch
is in the “On” position to
indicate the machine is
properly receiving power
and Standby mode is
disengaged. The red
Power Indicator light
flashes while fog is
being produced.
CONTROLS
