RORYCO Crowdbeamer, Руководство по эксплуатации устройства

Страница: 20 / 32

4 Crowdbeamer for the presenter
5. You can now:
- Optionally connect crowdbeamer to a room display (page 22).
- Invite your audience to start sharing your screen.
Connecting to a smartphone or tablet
To connect a smartphone or tablet you can use either an HDMI or a VGA connection. HDMI is
recommended since it provides a higher resolution.
To make the connection you need:
• Either an HDMI-HDMI cable AND an adaptor cable that will connect to your smartphone or tablet
and the HDMI cable,
• Or a VGA-VGA cable AND an adaptor cable that will connect to your smartphone or tablet and
the VGA cable,
Note: Not all smartphones or tablets provide an output with a video signal. MHL capable
devices (see http://www.mhltech.org/devices.aspx ) can be connected via a MHL-2-HDMI
adapter. iPad and iPhone can be connected via an Apple Lightning Digital AV Adapter.
1. Make sure that you are looking at the input side of the crowdbeamer device, see Figure 6: Position
of the input connections (page 19).
2. Connect the cable to the appropriate connection on the crowdbeamer device: HDMI-in or VGA-in.
Note: The maximum length of the input cable is 10m.
3. Connect the adaptor cable between the HDMI/VGA cable and the tablet or smartphone.
Figure 9: Connecting to a smartphone/tablet using HDMI
20 crowdbeamer device manual Version 1.2
©
RORYCO NV Last updated 2017-08-26