RORYCO Crowdbeamer, Руководство по эксплуатации устройства

Страница: 14 / 32

3 The crowdbeamer device
3.3 Upgrading the firmware
The firmware of your crowdbeamer device can be upgraded manually or semi-automatically (with
the device fetching the latest firmware for you).
The current firmware version can be seen in the Status page (page 26).
For an overview of the features of the newest firmware version see What's New (page 4).
Before you can upgrade you need to have activated your device (page 18).
Note:
Before you start the firmware upgrade process, make sure the crowdbeamer device is
connected to the power grid.
Upgrading the firmware manually
1. Go to www.crowdbeamer.tech .
2. Click on Firmware Upgrade.
3. Save the file.
The firmware upgrade file is a signed file (for security reasons), and must be of the format .tar.bz2,
tar.gz or .tar.
4. On the crowdbeamer device, switch the power ON.
5. Connect the device used to download the file to the crowdbeamer private WiFi network.
By default no password is required. If a password has been set (page 28) this will (by default) be
shown in the OLED display.
14 crowdbeamer device manual Version 1.2
©
RORYCO NV Last updated 2017-08-26