Page 9
© ROPOX 2017
Mounting instructions
Installation information
CONSTRUCTION
The wall must of a suitable material for screws
and approved for wet rooms.
The grey-shaded area states the minimum
area for reinforcement of the wall.
Load tested and safe up to 200kg. In
accordance with DS/EN 12182:2012 and ISO
17966:2016, the max. user weight is 100kg.
Max. tensile load of top screws
40-42110: 50kg
40-42010: 50kg
40-42011: 50kg
40-42012: 50kg
Plumbing
The drain is Ø32.
The water supply ends with 2 (two) 90° stop
valves with ½” outside thread pointing
downward.
All hoses for water and drain installations must
be flexible to ensure free and unhindered
adjustments within the height adjustment range
of 70-90 cm (the upper side of the
washbasin).
For the purchase of adapters for connection
to various standard installations, see the
section ”Connection adapters”
NOTE:
All dimensions are based on a washbasin
height of 700-900mm above floor level. If a
change of this height is required, the
recommended dimensions must be changed
accordingly.
